60m HDMI extender that provides 3D over a single Cat6e cable.

60m HDMI Extender over Single Cat6e cable with 3D.Feature:1.Each set includes one Sender and one Receiver.2.Use single UTP LAN cable(Cat 6)to substitute HDMI cable to achieve long transmission distance, the UTP Cable follows the standard of IEEE-568B.3.Transmission distance extends up to 60 meters under 1080P.4.Support

Featured Products

60m HDMI Extender over Single Cat6e cable with 3D.


Feature:

1.Each set includes one Sender and one Receiver.
2.
Use single UTP LAN cable(Cat 6)to substitute HDMI cable to achieve long transmission distance, the UTP Cable follows the standard of IEEE-568B.
3.
Transmission distance extends up to
60 meters under 1080P.
4.
Supports lossless compressed digital audio: Dolby True-HD, DTS-HD Master Audio.
5.
Transmit Digital Audio and Video over the CAT6 cable with zero signal loss.
6.
Data transfer speed 6.75 Gbps.
8.Support
HDCP 1.2
9.Support EDID
10. DC 5V power supply




 
Specifications 
Operating Temperature Range-5 to +35ºC(+23 to +95ºF)
Operating Humidity Range5 to 90%RH (No Condensation)
Input Video Signal0.5-1.0 Volts P-P
Input DDC Signal5 volts p-p(TTL)
Support Video FormatDTV/HDTV:480i/576i/480P/576P/720P/108
 
0i/1080P/3D video/Bi-directional IR
Video OutputHDMI ,HDCP
Support Audio FormatDTS-HD Master Audio,Dolby true-HD etc.
Transmission Distance1080P 8-bit 60m(Maximum) over single
 
CAT5E/6 /24AWG/Solid
Power consumption5watts(Maximum)
Dimension (L×W×H)81.5x43.5x23mm
Net Weight250g(Pair)
Note1: Specifications are subject to change without notice. Mass and dimensions are approximate.
 Sink must support 3D video when sources is 3D device
 When in 36Bits deep color mode, we suggest set the HDMI source device to output 1080i or 720p.


Package Contents
                                                         Sender Panel






60m HDMI Extender Over Single Cat6e Cable with 3D.







 
1:  Red  instruction power           2:  Blue instruction signal
3:  HDMI input                    4: Power input                      
5: CAT 6 output          6:  IR-TX              7:  IR-RX
8:EDID copy mode: connect the display to the HDMI input port, then press the key, it'll copy the EDID to the extender; Reset EDID: press the key for 3 seconds, it'll reset the EDID to 1080P 3D stereo.


                                                                                 

                                                    Receiver Panel
60m HDMI Extender Over Single Cat6e Cable with 3D.






1:  Red  instruction power          2:  Blue instruction signal
3:  HDMI  output                 4: Power input                      
5: CAT 6 input            6:  IR-TX                7:  IR-RX






Connecting and Operating







60m HDMI Extender Over Single Cat6e Cable with 3D.







1) Connect the HDMI signal sources (Such as PS3, STB etc) to    HDMI Sender.
2) Connect CAT 6 cables to both the outputs of the Sender and inputs of the Receiver.  (The cables must follow the standard of EIA-TIA 568B).
3) Connect the HDMI output (Such as HD-LCD, HD-DLP) into the Receiver.
Attention: Insert/Extract cables carefully.
 

 



Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzene to clean this unit.

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours